Skip to main content
Energy and computing foundations

Understand Energy and Computing Conversations: Essential Terms

When reading a quote or watching a conversation, distinguish fuel, equipment, supply arrangements and measurement. In particular, kW is power; kWh is energy over time.

The 14 terms below are an introduction, not fuel specifications, an operating manual or legal definitions for every country. Commercial language can be loose: ask for the actual boundary and units.

Fundamentals explainer Prepared by Learn Editorial Last updated

First published:(Taipei)

Concept illustration of a dial, clock and accumulated blocks for power and energy
AI-assisted concept illustration; not a real site, product specification or engineering design.

14 terms: distinguish concepts and units

These 14 definitions are maintained as one Learn editorial dataset shared by the glossary and guides, not reproduced passages from external documents. Start with the plain meaning, then the caution for each term; editorial references are grouped at the end.

Off-grid, grid-connected and islanded operation describe connection and operating states. The labels alone do not guarantee switching capability or permission to export electricity.

Terms and common confusions
Term / EnglishPlain meaningDo not confuse
Wellhead gasGas at the wellhead, whose composition and condition must be established.Not a guarantee that any generator can use it directly.
Associated gasNatural gas associated with crude oil production.Describes origin, not a fixed heating value or cheap fuel.
Flare gasUsually a gas stream sent to a flare, or its potential recovery.A disposal context, not a uniform composition grade; ask which stream.
Pipeline gasNatural gas supplied by pipeline, subject to that network’s delivery specification.Pipeline supply does not mean identical quality and pressure worldwide.
Off-gridHere, a load supplied without relying on the public electricity grid.Not an exemption from engineering, safety management or permissions.
Grid-connectedAn arrangement connected to the grid; clarify parallel operation, imports and permitted exports.Connection alone does not authorize export of all generated power.
Gas reciprocating engineGas burns in an engine whose reciprocating pistons produce mechanical power to drive a generator.Not a gas turbine; consult the exact model’s maintenance documents.
Gas turbineA different machine using hot gas to drive a turbine and produce power.Using the same fuel does not make engine performance or maintenance terms interchangeable.
Power (kW / MW)The rate of supplying or using energy; 1 kW equals 1,000 W.Nameplate power is neither monthly energy nor necessarily net power at the load.
Electrical energy (kWh)Energy accumulated over time; electricity bills commonly use kWh.kWh is not kW/h; outages and changing load affect accumulated energy.
Heating valueHeat released by a specified fuel quantity on a stated basis.Volume is not energy; compare reference temperature, pressure and heating value before using a per-volume price.
Higher / lower heating value (HHV / LHV)Different bases depending on whether water-vapour condensation heat is included.Do not compare efficiency figures across HHV and LHV without reconciling the basis.
Electrical efficiencyElectrical output divided by fuel-energy input, with heating-value and gross/net boundaries stated.Combined heat and power (CHP) overall efficiency includes useful heat and is not electrical efficiency.
AvailabilityThe share of a defined period when equipment is available, with exclusions specified.Not load factor, miner uptime or guaranteed electricity delivery; ask how planned and forced outages count.

Separate units with one hypothetical example

Assume a load consumes a constant 100 kW for 2 hours without interruption: 100 kW × 2 h = 200 kWh. This is only a unit example, not generator performance, fuel consumption or a market-cost estimate; upstream auxiliary energy is not calculated.

A fuel price per cubic metre, a generator rated in MW and a bill in kWh are not directly comparable. Establish fuel-volume reference conditions and heating value, output, operating time and billing boundary rather than using one universal gas conversion.

When you hear a percentage, ask for the denominator

For efficiency, establish input and output boundaries; for availability, establish the period and counted outages. Percentages on different bases are not directly comparable, and equipment availability is not miner uptime or guaranteed power delivery.

Prepared by Learn Editorial to help miners understand information and question suppliers. This is not engineering design, operating instructions, a generator-selection guarantee, a compliance conclusion or an earnings promise. It does not claim Learn generation experience or expert review. A specific site still needs qualified local engineering and service assessment.

Editorial references and updates

Learn explains foundational concepts in its own editorial wording. References below remain available for verification; manufacturer-specific conditions are cited beside the relevant claim. These records do not imply Learn testing or engineering endorsement. EIA: natural gas basics ↗EIA: processing, delivery and storage ↗US DOE: grid-connected and islanded microgrid modes ↗EPA: reciprocating engines, maintenance, fuels and availability ↗EPA: combustion turbine technology ↗EIA: measuring electricity ↗EIA: energy units and conversion bases ↗EPA: expressing efficiency, Appendix A ↗

Sources accessed on 2026-10-31 (Taipei). EIA explains US energy fundamentals, not every country’s gas-quality or interconnection rules. The 2015 EPA combined heat and power (CHP) catalog is used for concepts and maintenance categories, not current prices. Manufacturer documents support only their stated products and conditions, not all equipment. Use the content-policy page to report corrections; revisions retain an update date. Citations and corrections ↗

Continue reading and watching