Antminer S23e U2H
SHA-256 · Hydro cooling
- Hashrate
- About 865 TH/s
- Power Consumption
- About 8650W
- Efficiency
- About 10 J/TH
Profitability Estimate
Loading Daily Revenue Data…
- Hashrate Used for SOLO
- 865 TH/s
- BTC Network Difficulty
- Loading Daily Revenue Data…
This is a static probability estimate based on current difficulty and entered hashrate, not a predicted block date. Actual results still depend on uptime, effective hashrate, network difficulty changes and SOLO pool rules.
- Operating Hashrate
- 865 TH/s
- Operating Power
- 8,650 W
- Extra Power / Line Loss
- 3%
- Effective Pool Fee
- 4%
- Effective Uptime
- 95%
This is estimated revenue minus theoretical electricity cost. It does not yet deduct pool fees, downtime, repairs or hosting surcharges.
This Estimate Assumes Electricity Is Billed for Actual Operating Time and Actual Power Use. Fixed Rent, Minimum Power Commitments, Electricity Charged during Downtime, Repairs, Depreciation and Other Hosting Fees Are Not Included.
If Average Hashrate Already Includes Downtime, Set Uptime to 100%. If Power Already Includes Line Loss, Cooling or Shared Loads, Set Extra Power to 0% to Avoid Counting Them Twice.
Yield and Default Coin-Price SourcesWaiting for Data
Choose BTC or BCH, then use this miner’s hashrate and the selected network’s current difficulty. Electricity price is used only for daily electricity cost and does not change the block probability.
Adjust coin price / purchase cost
- Values Used in This Estimate
- 865 TH/s · 8,650 W
- SHA-256
- BTC
Advanced Operating Estimate (Optional)
This Mode Updates the Same Result Panel with the Operating Conditions below. Switch back to Quick Estimate to Restore the Listed-Specification Results.
Uses This Page’s Fixed Specifications by Default, with 3% Extra Power, 4% Pool Fee and 95% Uptime.The following results are a static estimate based on current conditions. They are for reference only and do not represent future actual revenue or payback.
Estimate Notes
Use this page’s listed hashrate and power together with the latest available daily revenue data to compare electricity-price scenarios.
Quick Estimate — Calculate theoretical output and electricity costs based on the nominal hashrate and power consumption on this page
Use Actual Operating Conditions — Include Operating Hashrate, Power, Extra Power, Pool Fee and Uptime
SOLO Probability — Estimate the Chance of Finding a BTC or BCH Block Independently
SHA-256 miners use the 24-hour gross BTC network yield and exclude BCH and transaction-fee revenue. Scrypt miners use source-reported, cross-checked LTC/DOGE pool yield per GH per day; because that figure already reflects the source pool's payout basis, the pool fee is not deducted again.
"Theoretical shutdown currency price" means that under the input electricity price, when the currency price drops to this position, the current output value just covers the theoretical electricity cost; it does not mean that the equipment has actually been shut down, and the additional hosting costs may still make the actual threshold higher.
This tool is provided only as a reference for estimating miner costs and revenue. It is not investment advice, a purchase recommendation or a revenue guarantee.
The power shown on a miner page is the device’s listed or theoretical power. Actual operating power can vary with the individual unit, operating mode, ambient temperature, cooling system, power-supply efficiency and site infrastructure.
Actual hosting costs also depend on the site’s billing method, electrical losses, management fees, repair costs, uptime and other service terms. The miner’s listed power alone should not be used to predict an actual bill.
Mining revenue continually changes with coin prices, network hashrate, mining difficulty, block rewards, transaction-fee revenue, pool fees and other market factors.
Daily revenue, electricity-cost share and static payback shown here are theoretical estimates based on the current data and user inputs. Future actual results may differ materially.
Core Specifications
- Brand
- Bitmain
- Model
- Antminer S23e U2H
- Series
- Antminer S23 Series
- Product Positioning
- BTC ASIC Miner
- Algorithm
- SHA-256
- Coin
- BTC
- Hashrate
- About 865 TH/s
- Power Consumption
- About 8650W
- Efficiency
- About 10 J/TH
- Cooling
- Hydro cooling
- Specification Basis
- Typical Specification
Pay special attention to this one
- BITMAIN 865T-10 product page checked on October 29, 2026 (Taipei): rated 865 TH/s; wall power 8650 W and efficiency 10 J/TH at 35°C coolant inlet. Hashrate tolerance is ±3%; power and efficiency ±5%. These are manufacturer typical values, not JGM measurements or an earnings guarantee.
- Power requirements checked on October 29, 2026: three-phase 380–415 V, 47–63 Hz, maximum 20 A and LP34 connector. The September 20 record also listed RJ45 10/100M, which was not rechecked this time. Confirm the delivered unit nameplate and version documents before connecting power.
- Hydro requirements checked on October 29, 2026: inlet 20–50°C, flow 16–20 L/min, pressure no more than 3.5 bar and UQD08 connectors. The September 20 record listed antifreeze/pure/deionized water and respective pH ranges 7.0–9.0/6.5–7.5/8.5–9.5. Fluid types and pH were not rechecked this time; consult the system documents before maintenance.
- Dimensions and handling checked on October 29, 2026: unit 600 × 482.6 × 86 mm, 29 kg; packaged 820 × 617 × 220 mm, 32.5 kg. The September 20 humidity range of 10–90% RH (non-condensing) and drained-unit storage range of −20–70°C were not rechecked; they are not observed site test conditions.
- On October 29, 2026 (Taipei), the store showed Sold Out and displayed $9,515/Unit and $11/T without an explicit currency code. A currently executable purchase price is unknown; USD is not confirmed. Freight, customs and taxes are excluded. This does not extend an old promotion or prove order availability, spot inventory or delivery.
- On October 29, 2026, the store still expected shipping from November 2026; named batches and actual arrival evidence were unknown. It lists a 365-day original-buyer warranty from shipment, reseller responsibility for resold units and no cancellation, refund or model/batch change after order submission. A forecast date does not automatically become confirmed delivery.
- The official first-launch date is January 27, 2026. The launch page’s $22/T is historical, not a current price. The unsupported April 1 date on the old page has been corrected; the official S23e U2H name and this permanent URL are retained.
- Document name
- BITMAIN official product specifications (865T-10)
- Document version
- 865T-10
- Document date
- Document date not stated (live product listing)
- Last checked
- 2026-10-29
Release and Industry Timeline
Only records directly tied to this exact model and supported by public sources are shown.
- View data card
Product updateAnnounced
BITMAIN | Choosing AR30 or AR31 Hydro Deployment
- View data card
Product updateAnnounced
BITMAIN | S23e U2H Product and Expected Delivery Batches
- View data card
Industry exhibitionHeld
BITMAIN|Mining Disrupt 2026

Approximately 600 TH/s 
About 305 TH/s
About 442T
About 1.16 PH/s