Skip to main content
Bitcoin Mining Knowledge Base

ASIC miners are dedicated machines built for only one algorithm.

BTC miners specialize in calculating SHA-256. When looking at the machine, first grab four numbers: hashrate, power consumption, energy efficiency, and cooling; put the brand and model in the second step.

wind
hot
power in→Chip does SHA-256→heat removal
miner specifications translation

Looking at the specification sheet, first ask these four questions

TH/s

Hashrate

How many trillion times can it be tried per second?

The higher the number, the higher the proportion of block production probability allocated to the entire network.

W

Power Consumption

How much electricity does the machine consume per hour?

3,355 W is approximately 3.355 kWh per hour.

J/TH

Efficiency

How much energy is used per 1 TH/s?

The lower the number, the more power you save, and cross-generational comparisons are most useful.

Air / Hydro

Cooling

How to take away the heat?

Air cooling and hydro cooling require completely different sites and infrastructure.

Antminer S23 air-cooled miner 305 TH/s 3,355 W 11 J/TH
Example: Antminer S23

305 TH/s is fast, but the real kicker is 11 J/TH

If you only look at the hashrate, it is easy to mistake high hashrate for high profits; only after dividing the power consumption together can you know how much electricity this machine uses per unit of hashrate.

3,355 W ÷ 305 TH/s = 11 J/TH
  • 11 J/TH means it is more resistant to electricity price pressure than the old machine with 23 J/TH.
  • 3.355 kW continuous operation, using approximately 80.52 kWh a day.
  • Air-cooled machines still require industrial-grade power supply, exhaust, dust suppression and noise management.
Same algorithm, different generations

Put three BTC miners on the same scale

What is compared here is nominal specifications. Actual operation will also be affected by mode, temperature, firmware, machine condition and site stability.

How is heat carried away from the miner?

Air cooling

The equipment is simple, but the environmental requirements are still high

Mining-farm exhaust wall and large fans for air cooling
Real scene of air-cooled mine: not only the miner fan, but also the entire site must form a stable air duct.
  • Look at the inlet air temperature, exhaust air volume, dust and noise.
  • Suitable for mines with standard racks and mature air ducts.
Hydro cooling

Better efficiency, heavier infrastructure

Hydro miner racks, piping and mining-farm interior
Real scene of a hydro-cooled mine: machines, pipelines, pumps, CDU and outdoor cooling equipment are a complete system.
  • Look at water lines, CDU, dry cooler, water quality and maintenance capabilities.
  • You cannot just connect the water cooler to power and turn it on, you need a complete system.

EMCD mining site in Brazil · Original video uploaded June 16, 2026

This site uses evaporative cooling pads with an air-intake passage. The clip illustrates airflow; it does not provide measured cooling results. The recording date has not been verified.

This footage comes from JGM's visit to its partner EMCD and is included only to illustrate the cooling setup.

View the full source video ↗
Next step

After understanding the specifications, convert hashrate and power consumption into daily income and electricity bills

Understand miners’ income
Next Steps

After knowing the machine specifications, compare the deployment conditions

The main website income calculator can be used for formal trial calculations; the formula page of Learn is suitable for gradually understanding how each number is derived.

  1. 01Research
  2. 02Run the Numbers
  3. 03Review Deployment